Countertop Water Distiller – 4L Stainless Steel

Everyday tap water contains naturally occurring dissolved minerals alongside other dissolved substances. Conventional jug filtration can improve certain characteristics of water, but distillation uses a fundamentally different separation process.

- Comprehensive Water Purification — Water is physically converted into steam and condensed again, separating the water from many dissolved and non-volatile substances.

- No Permanent Installation — Simply add source water to the chamber and connect the unit to power. No plumbing, drilling or modifications to your kitchen are required.

- Stainless-Steel Water Chamber — The main boiling chamber uses corrosion-resistant 304 stainless steel rather than relying on a plastic boiling reservoir.

- Glass Collection — Finished distilled water is collected in a borosilicate glass jug, helping minimise plastic contact after distillation.

- Freshly Distilled at Home — Produce distilled water when required rather than depending solely on pre-packaged distilled water.

- Designed for Everyday Use — A 4L chamber and approximately 1L/hour distillation rate make the system suitable for regular household water production.

- 4L Distillation Capacity — The stainless-steel boiling chamber holds up to 4 litres of source water per cycle.

- Approximately 1L/Hour Production — The 750 W heating system is specified to distil approximately 1 litre of water per hour, meaning a full 4 L cycle takes roughly four hours under normal operating conditions.

- 304 Stainless-Steel Chamber — The primary boiling chamber uses 304-grade stainless steel for corrosion resistance and straightforward cleaning.

- Activated-Carbon Finishing Stage — Condensed water passes through a replaceable activated-carbon sachet at the outlet before entering the collection vessel.

- Borosilicate Glass Jug — A separate 4L glass collection container receives the finished distilled water.

- Fan-Assisted Condensation — An integrated cooling fan assists the condenser in cooling the generated steam back into liquid water.

- Automatic High-Temperature Protection — Heating automatically stops at approximately 150°C / 300°F, providing protection against overheating once the water has been depleted.

- Simple Reset Operation — Once the system has completed a cycle and cooled/refilled as required, the reset control allows another distillation cycle to begin.

- Easy Descaling — Mineral deposits left behind during distillation can be cleaned from the stainless-steel chamber using the supplied cleaning agent.

Designed for regular home use, the CO-Z provides a convenient way to produce distilled water as part of an everyday water routine.

- Everyday Drinking Water — Produce freshly distilled water at home for drinking and general hydration.

- Tea, Coffee & Cooking — Distilled water can also be used for everyday food and beverage preparation where a low-mineral water source is preferred.

- Low-Mineral Water — Because the distillation process leaves most dissolved minerals behind, the finished water has a very different mineral profile from ordinary tap water.

- Other Household Uses — Distilled water is commonly used where mineral deposits are undesirable, including certain humidifiers, steam appliances and other compatible equipment. Always follow the appliance manufacturer's water requirements.

- Designed for Continued Use — The stainless-steel boiling chamber can be repeatedly cleaned and descaled, while the activated-carbon post-filter can be replaced as part of routine maintenance.

- Straightforward Maintenance — Unlike a multi-stage filtration system, the principal maintenance is cleaning mineral residue from the boiling chamber, keeping the collection jug clean and periodically replacing the carbon filter.

For continued performance, do not allow heavy mineral scale to accumulate inside the boiling chamber. Cleaning frequency will depend on the hardness and mineral content of the source water.