Activated Carbon Filter Sachets for Water Distillers
Activated Carbon Filter Sachets for Water Distillers
Couldn't load pickup availability
Share
Coconut-Shell Activated Carbon | 5.5 × 7.5cm | 50 & 100 Pack Options | For Countertop Water Distillers
Replacement activated carbon filter sachets designed for the post-filtration stage of countertop water distillers. Made with coconut-shell activated carbon, each sachet provides a final filtration stage after distillation and can be easily replaced as part of routine distiller maintenance.
About This Replacement
These replacement sachets contain coconut-shell activated carbon and are designed for the final post-filtration stage of countertop water distillers. After water has been distilled, it passes through the activated carbon sachet before collection, helping refine the water at the final stage of the process.
Each sachet measures 5.5 × 7.5cm and is available in packs of 50 or 100, providing a convenient supply for routine filter replacement.
View full details
FAQs
-
How often should I replace the activated carbon sachet?
The supplier recommends replacing the activated carbon sachet approximately every 60 days. Replacement may be required more frequently depending on usage and water conditions.
-
How do I prepare the filter before use?
Soak the sachet in water for approximately 5 minutes, then rinse under running water for around 60 seconds before installation. This helps remove any loose carbon particles from transportation.
-
Which water distillers are these filters compatible with?
The 5.5 × 7.5cm sachets are suitable for our ZenVolt 6L Water Distiller and are intended for use with our CO-Z 4L Water Distiller. Always check the size of your existing filter sachet before purchasing for other water distillers.
Key Information
Product Type
Replacement Activated Carbon Filter Sachets
Filter Media
Coconut-Shell Activated Carbon
Sachet Size
5.5 × 7.5cm
Pack Sizes
50 Sachets / 100 Sachets
Designed For
Countertop Water Distillers
Compatibility: ZenVolt 6L Water Distiller; CO-Z 4L Water Distiller (pending final size confirmation)
Replacement Guidance: Approximately every 60 days; more frequently where required by usage and water conditions
Preparation Before Use: Soak in water for approximately 5 minutes, then rinse under running water for approximately 60 seconds before installation
Installation: Position in the distiller’s activated-carbon post-filtration holder/outlet as directed by the water distiller manufacturer
Care: Replace rather than clean or reuse spent sachets